ColiMinder® CMI-02 is a standard industrial device suitable for continuous monitoring of microbiological water quality, used in applications throughout the entire water cycle.
It is a fully automated water quality measurement system which is able to measure microbiological contamination of liquid samples within 15 minutes.
ColiMinder® is measuring the microbiological contamination through the specific enzymatic activity of the respective target organism.
Fluorometric measurement technology
Reagents & Consumables
- suitable for all available reagent kit
- Rinsing water connection (provided by customer)
- No contaminated or hazardous waste is produced
- Reagents holding capacity: up to 1000 measurements
fully automated sampling, measurement, cleaning and calibration
Online data visualization and automatic notification
1000 measurements without staff intervention
up to 54 (80 in special cases) measurements per day
Fully controllable through internet connection
2 sample intakes (more optional)
- 15 min measurement time followed by a 9 min cleaning cycle
- Continuous Mode: up to 54 measurements per day.
- Interval Mode: time between the measurements can be set manually
- Persistent Mode: Sample 1 or Sample 2
- Alternating Mode: Sample 1 and Sample 2
- The measurement process is a batch process.
For a short time, measurement frequency can be increased to approx. 80 measurements per day (with reduced cleaning).
Data transfer and visualization
Measurement data is directly transmitted to server through internet/ network connection
Live data visualization on dedicated website, results can be downloaded
Automatic notifications can be set (E-mail, SMS)
Measurement results are also available through RS232/RS485 or Modbus TCP (optional)
Measurement results can be saved on USB Flash Drive directly from the device
4 to 20 mA output optional
All functions and programming can be performed through remote control (internet or network connection required). The ColiMinder® is able to control ISCO 6700 auto samplers, which also can be controlled remotely through ColiMinder® remote control.
Using this service, you are able to monitor status and results of your ColiMinder live and online on a dedicated homepage. Results are presented in a timeline and can be downloaded in csv or xls
Sampling Unit – sample from a stream SU-1
Required for sampling from a pressurized stream
Sample Delivery Unit - Model "Paris"
Programmable Module for sample delivery – height distance up to 3 m
Sample Delivery Unit - Model "Hongkong"
Programmable Module for sample delivery – height distance up to 6 m, used especially in tidal settings
10-fold multisampling module 50 ml bottles
sample line extension up to 10 intakes
ISCO Auto-Sampler Control Board
To trigger and control ISCO auto samplers (different models)
developed especially to the needs in bottling industry – to automatically take higher volumes of sample (up to 20 ltrs) at contamination peaks, triggered automatically by the ColiMinder
Data Output Module 4-20 mA
Tailor-made racks for ColiMinder installations – please send us your requirements! Available for wall mounting, stand-alone, …
AutoSampler Control Port
Alarm–Relay output or alarm flashlight
|Measurement time for quantitative results||15 min.|
|Performance (measurements per day)||Standard: up to 56 (1x cleaning) or up to 45 (2x cleaning)
Special case (with reduced cleaning): up to 80
|Number of sample intakes||Standard: 2 (optional - 10)|
|Housing:||IP 65 (powder coated aluminum)|
|Full working cycle incl. automatic cleaning||< 30 min.|
|Power supply||90-264V AC - 150W max|
|Space for device W x H x D||60 cm x 60cm x 30cm|
|Dimensions W x H x D||55 cm x 50cm x 21 cm|
|Detection limit (E.coli)||0.8 mMFU/100ml|
|Detection limit (Enterococci)||0.5 µGU/100ml|
|Detection limit (Total Bacteria)||0.5 µU/100ml|
|Temperature range for operation||0°C to 40°C|
|Reagent cooler||0°C-20°C, 90W|
Need further details? Send us a note!
For any other questions, please write us at email@example.com or call us on +43 2284 2018810