Products
ColiMinder™ CMI-02 Low Energy Version
Product details
ColiMinder® CMI-02-LE is a low-energy version of Industrial ColiMinder® CMI-02. It can be powered by 12V batteries, 100/240V to 12V ACDC power supply or by car electrical system. ColiMinder® CMI-02-LE serves in areas with reduced power supply for long-term monitoring of bio-contaminated water samples. It can be installed in areas with rough environmental conditions (IP65 protection).
Its fully automated measurement system can measure microbiological contamination of liquid samples within 15 minutes.
The ColiMinder® is monitoring microbiological contamination through the specific enzymatic activity of the respective target organism.
Its fully automated measurement system is able to measure microbiological contamination of liquid samples within 15 minutes.
The ColiMinder™ is monitoring microbiological contamination through the specific enzymatic activity of the respective target organism.
features
Basic Principles
Fluorometric measurement technology
Reagents & Consumables
- Two component measurement reagents
(CM Quick Detect) - Cleaning solution (CM Quick Clean)
- Rinsing water (not provided)
- No contaminated or hazardous waste is produced
- Reagent holding capacity: up to 1,000 measurements
Key Features
fully automated sampling, measurement, cleaning and calibration
Online data visualization and automatic notification
100 measurements without staff intervention
up to 54 (80 in special cases) measurements per day
Fully controllable through internet connection
2 sample intakes (more optional)
Measurement Frequency
- 15 min measurement time followed by a 9 min cleaning cycle
- Continuous Mode: up to 54 measurements per day.
- Interval Mode: time between the measurements can be set manually
- Persistent Mode: Sample 1 or Sample 2
- Alternating Mode: Sample 1 and Sample 2
- The measurement process is a batch process.
For a short time, measurement frequency can be increased to approx. 80 measurements per day (with reduced cleaning).
Data transfer and visualization
Measurements data is directly transmitted to server through internet/ network connection
Live data visualization on dedicated website, results can be downloaded
Automatic notifications can be set (E-mail, SMS)
Measurement results are also available through RS232/RS485 or Modbus TCP (optional)
Measurement results can be saved on USB Flash Drive directly from the device
4 to 20 mA output optional
Remote control
All functions and programming can be performed through remote control (internet or network connection required). The ColiMinder® is able to control ISCO 6700 auto samplers, which also can be controlled remotely through ColiMinder® remote control.
Online visualization
Using this service, you are able to monitor status and results of your ColiMinder live and online on a dedicated homepage. Results are presented in a timeline and can be downloaded in csv or xls
Add-On Modules
10-fold multisampling module 50 ml bottles
sample line extension up to 10 intakes
ISCO Auto-Sampler Controller
To trigger and control ISCO 6700 auto sampler
10-fold multisampling module 250 ml bottles
sample line extension up to 10 intakes
Data Output Module 4-20 mA
Sampling Unit – sample from a stream SU-1
Necessary when sampling from a pressurized stream
Installation Rack
Tailor-made rack for installations on-site, including holdings for device, canisters, tablet
Connection Ports
WIFI
LAN
RS-232
USB
HDMI
Internal GPRS/LTE–Modem
AutoSampler Control Port
Alarm–Relay output or alarm flashlight
SpecificationS
| Measurement time for quantitative results | 15 min. |
| Performance (measurements per day) | Standard: up to 56 (1x cleaning) or up to 45 (2x cleaning) Special case (with reduced cleaning): up to 80 |
| Number of sample intakes | Standard: 2 (optional - 10) |
| Housing: | IP 65 (powder coated aluminum) |
| Full working cycle incl. automatic cleaning | < 30 min. |
| Power supply | 12V DC |
| Space for device W x H x D | 60 cm x 60cm x 30cm |
| Dimensions W x H x D | 55 cm x 50cm x 21 cm |
| Weight | 15 kg |
| Detection limit (E.coli) | 0.8 mMFU/100ml |
| Detection limit (Enterococci) | 0.5 µGU/100ml |
| Detection limit (Total Bacteria) | 0.5 µU/100ml |
| Temperature range for operation | 0°C to 40°C |
| Reagent cooler | 0°C-20°C, 90W |
Need further details? Send us a note!