ColiMinder™ CMI-02 Emergency Response Unit
ColiMinder® CMI-02-ERU (Emergency Response Unit) provides the capability to measure microbiological contamination on the road taking sample from different sources or locations.
With a ColiMinder CMI-02-LE serving as base, the ERU is assembled on a rack and dedicated for mobile use or as a driving lab, e.g. in cars or on a boat.
It is equipped with batteries and all necessary equipment with consumables for 100 measurements. It can be deployed also for continuous monitoring when being equipped with different canisters.
Using integrated multisampling unit, ColiMinder can measure up to 10 samples one after the other on the way to the next sampling site.
ColiMinder® CMI-02-ERU has an internal 4G modem and can be powered by a 12V DC car system or any DC source between 12 and 30V DC. Solar panels or power packs can be directly connected.
Fluorometric measurement technology
Reagents & Consumables
- Two component measurement reagents
(CM Quick Detect)
- Cleaning solution (CM Quick Clean)
- Rinsing water (not provided)
- No contaminated or hazardous waste is produced
- Reagents holding capacity: up to 100 measurements
fully automated sampling, measurement, cleaning and calibration
Online data visualization and automatic notification
100 measurements without staff intervention
up to 54 (80 in special cases) measurements per day
Fully controllable through internet connection
10 sample intakes
- 15 min measurement time followed by a 9 min cleaning cycle
- Continuous Mode: up to 54 measurements per day.
- Interval Mode: time between the measurements can be set manually
- Persistent Mode: Sample 1 to Sample 10
- Alternating Mode: switching as requested between Sample 1 to Sample 10
- The measurement process is a batch process.
For a short time, measurement frequency can be increased to approx. 80 measurements per day (with reduced cleaning).
Data transfer and visualization
Measurements data is directly transmitted to server through internet/ network connection
Live data visualization on dedicated website, results can be downloaded
Automatic notifications can be set (E-mail, SMS)
Measurement results are also available through RS232/RS485 or Modbus TCP (optional)
Measurement results can be saved on USB Flash Drive directly from the device
4 to 20 mA output optional
All functions and programming can be performed through remote control (internet or network connection required). The ColiMinder® is able to control ISCO 6700 auto samplers, which also can be controlled remotely through ColiMinder® remote control.
Using this service, you are able to monitor status and results of your ColiMinder live and online on a dedicated homepage. Results are presented in a timeline and can be downloaded in csv or xls
10-fold multisampling module 50 ml bottles
sample line extension up to 10 intakes
ISCO Auto-Sampler Controller
To trigger and control ISCO 6700 auto sampler
10-fold multisampling module 250 ml bottles
sample line extension up to 10 intakes
Data Output Module 4-20 mA
Sampling Unit – sample from a stream
Necessary when sampling from a pressurized stream
Tailor-made rack for installations on-site, including holdings for device, canisters, tablet
AutoSampler Control Port
Alarm–Relay output or alarm flashlight
|Measurement time for quantitative results||15 min.|
|Performance (measurements per day)||Standard: up to 56 (1x cleaning) or up to 45 (2x cleaning)
Special case (with reduced cleaning): up to 80
|Number of sample intakes||10|
|Housing:||IP 65 (powder coated aluminum)|
|Full working cycle incl. automatic cleaning||< 30 min.|
|Power supply||Internal Battery Pack (included)
Power Supply 12V DC (included
12V car Adapter (included)
Solar Panel (12-30V, not included)
|Space for device W x H x D||60 cm x 70cm x 60cm|
|Dimensions W x H x D||60 cm x 65cm x 60 cm|
|Detection limit (E.coli)||0.8 mMFU/100ml|
|Detection limit (Enterococci)||0.5 µGU/100ml|
|Detection limit (Total Bacteria)||0.5 µU/100ml|
|Temperature range for operation||0°C to 40°C|
|Reagent cooler||0°C-20°C, 90W|